Hydraulic System
Lightweight Hand Pumps
Hydraulic Spreaders
Product Name: Hydraulic Spreaders
Product No:
Depending on the model they are ideal for lifting and levelling of machinery, splitting flanges, and for reforming bodywork. Pistons are spring return on all models and the tool can be ordered in the following versions
| Sitaco Ref. | Force (ton) | Capacity (ton) | Max working Pressure(bar) |
| 2111157 | 1 | 1 | 700 |
| 2112197 | 17 | 20 | 700 |
HT3 Torque Multipliers
Mechanical Power Wrench
Product Name: Mechanical Power Wrench
Product No:
The hand operated torque tools from Plarad are ideal for jobs without an external power source – effective for the loosening or tightening of bolts anywhere and at any time. Thanks to the planetary gears, no long levers are needed to multiply the manual force applied. No damage to nuts and bolts, thanks to the even transmission of force. Suitable for all industrial requirements, Easy handling, Small dimensions Controlled tightening of bolts with a torque wrench Switchable clockwise/anti-clockwise Simple loosening of bolts with low application of force Max.torque - up to -10100 NM (7453 LBS)
In-Line Regulating Valves
Product Name: In-Line Regulating Valves
Product No:
- Needle valve. To shut off the flow.
- One-way flow control valve. It permits controlled load lowering.
- One-way flow control valve with fine regulation. It permits 700 bar controlled load lowering.
- Double outlet needle valve. To split the flow in two separate ways.
- Needle valve with four outlets to split the flow in four separate ways.
- Needle valve. To shut off the flow.
- Double outlet needle valve. To split the flow in two separate ways.
- Needle valve with three outlets to split the flow in three separate ways.
- Needle valve with four outlets to split the flow in four separate ways.
Flange Spreader
Product Name: Flange Spreader
Product No:
FEATURES
This Europress flange spreader is completely Nitreg treated (excluded the aluminium parts) for a bigger strength and resistance to corrosion. It’ equipped with a standard CMI Europress cylinder, easy to use, safe and lightweight. It’s available in the version of 5 and 10 ton, with a working pressure of 700 bar. The flanges can be regulated to reach an opening from 48 to 223 mm. It’s supplied complete with the coupler.
Toe Lifting Jack
Product Name: Toe Lifting Jack
Product No:
Power jack with adjustable lifting toe designed to lift large loads from very low positions. They are provided with extendable bases for maximum stability. The lifting toe can be positioned at three different levels with only 25 mm minimum clearance needed. The head of the jack may also be used to lift vertically, or if the jack is turned onto its side it can be used for pushing.